Custom Etching

Hey guys,

I have been doing etchings for a while now, and I run etch shops on a couple of other forums, so I thought some people on here may have a use for my services.

In general the price will be 20USD + ship for a 6" square and will vary depending on shading, size, and complexity. Of course I can do special sizes and requests. I will do anything from small jobs to custom windows. Please PM me with any questions or requests. The price for a full sized 12" square window will vary depending on the etch size and complexity, but will run about $50. Of course the prices could change at any time, so PM me with your idea and I will work wih you on the price.

All payments will be through paypal. PM me for more info.
Keep in mind that I am by no means perfect, and my work will reflect that. I will take my time on each and every one to make sure you are satisfied. I do have some photoshop skills, though they are limited. If you are floating around an idea then post your idea and I will try and help you design something. I have a huge selection of tribal pics, so I would be happy to share them with anyone. I will take pictures of the finished work for you to see before I ship the plexi. You will see from the ones I have already done that the quality is good. I look forward to possibly doing some work for you guys.

Here is a link to my etch gallery... http://s13.photobucket.com/albums/a251/K_F..._Forcum/Etches/

Here are a few samples of my recent work...

I have to give Sn0wMan a Excellant Reference on his work :-)
I've comissioned him on a few jobs and the Quality is Superior.

Can you send in your case side or dose it have 2 be like a special material or w/e?

Fantastic work Sn0wMan. How do you do it?

@Slaymate: Thanks bro

@AKADeadly: You can give me the square dimensions and I can etch on that, then if your case has some curves you could cut that out. We can work just about anything out, I just need then dimensions

@Gm2â„¢: Thanks man, I do it all with a dremel and a flex shaft, along with some diamond bits.

I've started playing around with etchings. I just need something to hang my dremel from so it is easier for me to use my flex shaft! I'll try to post a pic of my first etch later.

OK, so here's my first etch. It was done on an old piece of plexi that belonged on an old case I had.

Anything you can do with this?

My advice would be to cut a whole new window. That would leave you a nice big space for an etch. I have the thermaltake tsunami case and that's what I did on it. If you are interested in an etch then we could definitely figure something out.

Your best bet would be to measure the dimensions of the viewable area, as well as the entire plexi, and then when you measure the height you could measure it at the shortest point to the bottom so I know where I can etch. I don't usually cut any special shapes out, I usually just cut it square, so if you had a way to cut the curves at the top and drill the holes then your all set.

It looks like a nice case, but it would be even better with a sweet etch! :P

Here's one I did this afternoon on a whim. It isn't on plexi though. I did this one on the cover off a cd jewel case. I know the pic isn't great, but the lights weren't enough and I didn't want the flash to make a big glare.