Settings for environment damage.

allan3013 · 08-22-2005, 05:55 PM

Did some setting changes and it works fine now. Here is the settings that unable wall damage etc.

Hi,

My specs are:

Amd xp 2000+

Gf4 ti 4200 128mb

512 ddr Pc2700

seagate 120gb 7200rpm

After a lot of time trying to achieve decent performance with nice graphics for the gf4 ti users i think i finally found the settings for that, here they are:

In ADVANCED COMPUTER (in performance settings) switch to this:

Single Player Physics --> Maximum

Particle Bouncing --> Maximum

Shell Casings --> On

World Detail --> Maximum

Corpse Detail --> Maximum

In ADVANCED VIDEO CARD switch to this:

Effects Detail --> Maximum

Model Decals --> Maximum

Reflections and Displays --> Maximum

Volumetric Lights --> Off

Volumetric Lights Density --> Maximum

FSAA --> 2x

Light Detail --> Maximum

Shadows --> Off (unfortantly..... even with all set to mimimum shadows degradate a lot the performance )

Shadow Detail --> Minimum

Soft Shadows --> Off

Texture Filtering --> Trilinear

Pixel Doubling --> Off

Dx8 Shaders --> Off

Resolution --> 640x480

Shaders --> Medium

I tried this settings with BitComet runing on the background so it lagged a little but it was very playable! If you have 1gb of ram you should have no problem at all runing the game with this settings. At least for the demo this settings are good enough to enjoy this game... hope that the full game run too with this settings! Now with this settings I could see some things that i could not see when the settings were set to minimum... when you shot to a wal you see the smoke and the holes in the walls... sometimes when you have a machine gun and shot to the walls there´s so smoke that you cannot see nothing... and the blood on the walls and stuff like that... AWESOME!!

Volvox · 08-23-2005, 01:07 AM

Maybe you should tell us to which game this settings are...

For most games is good to use:
- Bilinear filtering instead Trilinear (no big diffrence in graphics)
- FSAA Off (Anti Aliasing is greatly decreasing speed. Its better to increase resolution)

Fycus · 08-23-2005, 03:07 AM

F.E.A.R. most likely.

08-23-2005, 03:07 AM	#3 (permalink)
Fycus is on the 5th circle: Wrath & Sullenness Join Date: Apr 2004 Location: East Bay, California Posts: 1,232 Hellbux: 16,496	F.E.A.R. most likely. __________________ OFFICIAL ACKBAR FAN CLUB MEMBER Gamertag: Choatsy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-22-2005, 05:55 PM	#1 (permalink)
allan3013 is on the 1st circle: Limbo Join Date: Aug 2005 Posts: 3 Hellbux: 324	Did some setting changes and it works fine now. Here is the settings that unable wall damage etc. Hi, My specs are: Amd xp 2000+ Gf4 ti 4200 128mb 512 ddr Pc2700 seagate 120gb 7200rpm After a lot of time trying to achieve decent performance with nice graphics for the gf4 ti users i think i finally found the settings for that, here they are: In ADVANCED COMPUTER (in performance settings) switch to this: Single Player Physics --> Maximum Particle Bouncing --> Maximum Shell Casings --> On World Detail --> Maximum Corpse Detail --> Maximum In ADVANCED VIDEO CARD switch to this: Effects Detail --> Maximum Model Decals --> Maximum Reflections and Displays --> Maximum Volumetric Lights --> Off Volumetric Lights Density --> Maximum FSAA --> 2x Light Detail --> Maximum Shadows --> Off (unfortantly..... even with all set to mimimum shadows degradate a lot the performance ) Shadow Detail --> Minimum Soft Shadows --> Off Texture Filtering --> Trilinear Pixel Doubling --> Off Dx8 Shaders --> Off Resolution --> 640x480 Shaders --> Medium I tried this settings with BitComet runing on the background so it lagged a little but it was very playable! If you have 1gb of ram you should have no problem at all runing the game with this settings. At least for the demo this settings are good enough to enjoy this game... hope that the full game run too with this settings! Now with this settings I could see some things that i could not see when the settings were set to minimum... when you shot to a wal you see the smoke and the holes in the walls... sometimes when you have a machine gun and shot to the walls there´s so smoke that you cannot see nothing... and the blood on the walls and stuff like that... AWESOME!!

08-23-2005, 01:07 AM	#2 (permalink)
Volvox is on the 3rd circle: Gluttony Join Date: Dec 2003 Location: Poland - Poznan Posts: 286 Hellbux: 4,613	Maybe you should tell us to which game this settings are... For most games is good to use: - Bilinear filtering instead Trilinear (no big diffrence in graphics) - FSAA Off (Anti Aliasing is greatly decreasing speed. Its better to increase resolution)