I'm off.. - Page 3

Syanide · 06-14-2003, 12:59 PM

^^^^^^^^^^^^^^
It means, if the websites that he has been reading on how to overclock his CPU (i take it he has been reading up), Havnt told him to increase his FSB then he should find a site that goes into more detail about it.

Irs2k3 · 06-14-2003, 01:11 PM

^^^^^^^^^^^^
oic

Well there is only two ways to overclock your cpu. Either by increasing the FSB or increasing your multiplier.

Lets say you have a 1.8 intel cpu thats a 1800=100x18 100mhz for the FSB and 18 as a multiplier.

so if we increase the FSB to 104 it will be 104x18=1872 MHZ.

and you will have an overclocked cpu

Syanide · 06-14-2003, 01:28 PM

Quote:

Originally posted by irs2k3@Jun 14 2003, 02:11 PM
^^^^^^^^^^^^
oic

Well there is only two ways to overclock your cpu. Either by increasing the FSB or increasing your multiplier.

Lets say you have a 1.8 intel cpu thats a 1800=100x18 100mhz for the FSB and 18 as a multiplier.

so if we increase the FSB to 104 it will be 104x18=1872 MHZ.

and you will have an overclocked cpu

Oh kool, i didnt know it worked like that *embarassed*

What if you have a 2500+ Barton @ 333FSB (factory set) and your Mobo says it can handle a 333FSB, does that meen it cant handle anymore than that?

here's a link to the one im getting you see --LINK-- and it says 333/266/200MHz ...

interman · 06-14-2003, 01:38 PM

you can usually flash the bios to support more

Irs2k3 · 06-14-2003, 01:41 PM

^^^^^^^^^^^^^^

the 333/266/200 means your memory FSB and not your CPU FSB.

I think Barton cpus runs at 133 mhz but bouble pumped ( 266MHZ cpu front side bus)

By the way, if you increase your CPU front side bus, your PCI bus and your Memory front side bus will be increased automatically, so be carefull

The PCI bus runs at 66MHZ
The AGP bus runs at 266MHZ 4x \ 533MHZ 8x

Irs2k3 · 06-14-2003, 01:48 PM

I think Bartons are 333MHZ/266MHZ front side bus ( 166MHZx2) compatible.

Irs2k3 · 06-14-2003, 01:51 PM

Quote:

you can usually flash the bios to support more

If the Bios dont feature settings to overclock your CPU then you flash it to add these settings or you can change the jumpers placement located on your MOBO to overclock your cpu.

Bucky · 06-14-2003, 02:46 PM

Interman,

So far, I got it to 1.7Ghz on standard voltage (1.6). I'm gonna fool around with upping the voltage some today. I had it up to 1.8v last night (that's how I got it to 2Ghz oooh so briefly)

irs,

I'm very well versed on OCing cpus, my old 1.4 Tbird ran for well over a year at 1.66. Multiplier is maxed for my mobo, which only lets me set it as far "13+"

CPUz keeps showing the multiplier at 11 though, not sure what that is all about, my bios is the latest ATI offers. Flashed it last night.

Syanide, go to www.hexus.net. They ran a test on my cpu and gave a very detailed discussion about how they went through the overclocking.

Irs2k3 · 06-14-2003, 02:59 PM

^^^^^^^^^^^^^^
I see , But let us not to fool ourselves by saying yeah i managed to overclock my cpu from x to y . The only way to track the boost in performance is by running benchmarks and to see if the system is stable. I think thats the most important thing to be aware about.

Secondly if you have a bottleneck in your computer, lets say your system memory frequency, Even if you upgrade or overclocked your cpu/vga you will not acheive the optimal results. Always try to find the Bottleneck in your system and try upgrade it.

06-14-2003, 12:59 PM	#21 (permalink)
Syanide is on the 7th circle: Violence Join Date: Dec 2002 Location: UK Posts: 6,538 Hellbux: 75,169	^^^^^^^^^^^^^^ It means, if the websites that he has been reading on how to overclock his CPU (i take it he has been reading up), Havnt told him to increase his FSB then he should find a site that goes into more detail about it. __________________ by Me, V1.5 <Nxs> When I was 16 I was a potmaster also, when I stopped, Ibecame retarded <GreatCthulhu> sighs Noone quotes me in their sig.. <Dirt_PridE> Red pill, blue pill? f**k it, gimme range\'>beer!! For the most up to date hardware Shiz go to --> Hwhell.Com For anything Unreal related, from mod downloads to reviews! --> Unreal Hell

06-14-2003, 01:38 PM	#24 (permalink)
interman Administrator Join Date: Jan 2002 Posts: 4,108 Hellbux: 88,113	you can usually flash the bios to support more __________________

06-14-2003, 02:46 PM	#28 (permalink)
Bucky Gamershell Grandpa Join Date: Sep 2002 Location: Cincinnati, OH, USA Posts: 5,712 Hellbux: 99,274	Interman, So far, I got it to 1.7Ghz on standard voltage (1.6). I'm gonna fool around with upping the voltage some today. I had it up to 1.8v last night (that's how I got it to 2Ghz oooh so briefly) irs, I'm very well versed on OCing cpus, my old 1.4 Tbird ran for well over a year at 1.66. Multiplier is maxed for my mobo, which only lets me set it as far "13+" CPUz keeps showing the multiplier at 11 though, not sure what that is all about, my bios is the latest ATI offers. Flashed it last night. Syanide, go to www.hexus.net. They ran a test on my cpu and gave a very detailed discussion about how they went through the overclocking. __________________ Papajoe r0ckz3rz!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2003, 01:11 PM	#22 (permalink)
Irs2k3 is on the 1st circle: Limbo Join Date: Nov 2003 Posts: 17 Hellbux: 36,412	^^^^^^^^^^^^ oic Well there is only two ways to overclock your cpu. Either by increasing the FSB or increasing your multiplier. Lets say you have a 1.8 intel cpu thats a 1800=100x18 100mhz for the FSB and 18 as a multiplier. so if we increase the FSB to 104 it will be 104x18=1872 MHZ. and you will have an overclocked cpu

06-14-2003, 01:41 PM	#25 (permalink)
Irs2k3 is on the 1st circle: Limbo Join Date: Nov 2003 Posts: 17 Hellbux: 36,412	^^^^^^^^^^^^^^ the 333/266/200 means your memory FSB and not your CPU FSB. I think Barton cpus runs at 133 mhz but bouble pumped ( 266MHZ cpu front side bus) By the way, if you increase your CPU front side bus, your PCI bus and your Memory front side bus will be increased automatically, so be carefull The PCI bus runs at 66MHZ The AGP bus runs at 266MHZ 4x \ 533MHZ 8x

06-14-2003, 01:48 PM	#26 (permalink)
Irs2k3 is on the 1st circle: Limbo Join Date: Nov 2003 Posts: 17 Hellbux: 36,412	I think Bartons are 333MHZ/266MHZ front side bus ( 166MHZx2) compatible.

06-14-2003, 02:59 PM	#29 (permalink)
Irs2k3 is on the 1st circle: Limbo Join Date: Nov 2003 Posts: 17 Hellbux: 36,412	^^^^^^^^^^^^^^ I see , But let us not to fool ourselves by saying yeah i managed to overclock my cpu from x to y . The only way to track the boost in performance is by running benchmarks and to see if the system is stable. I think thats the most important thing to be aware about. Secondly if you have a bottleneck in your computer, lets say your system memory frequency, Even if you upgrade or overclocked your cpu/vga you will not acheive the optimal results. Always try to find the Bottleneck in your system and try upgrade it.