| Home | News | Downloads | GamersHell.com TV | Feedback | Casual Games | Forums | |||
         |
|||
03-06-2005, 04:20 AM
|
#1 (permalink) |
|
is on the 1st circle: Limbo
Join Date: Feb 2005
Posts: 28
Hellbux: 1,388
|
hey i have and MSI KM4M-V mobo and an amd 2600+ and the temps show 55 - 57 C idle, and and its showing up as a 2000+ can someone help me i'm confuzzled, also i cannot connect to internet cuz i lost my Telus cd. so if its a driver i'll just put it on floppy.
__________________
|
|
|
|
03-06-2005, 06:08 AM
|
#2 (permalink) |
|
Here's a support page for Telus, hope this helps
http://www.mytelus.com/howto/article.do?pa...ticleID=1716530 :thumbup: |
|
|
|
|
03-06-2005, 02:39 PM
|
#3 (permalink) |
|
is on the 2nd circle: Lust
Join Date: Jun 2003
Location: well, somewhere in Germany
Posts: 166
Hellbux: 4,160
 |
And switch the FSB at the BIOS. (press del at startup pc) In the moment, there should be enabled 133 Mhz, but your cpu should run with 166 FSB (if it's a Barton...) to reduce the high temperature, try to reduce the V-Core. (only try if you are sure, that you know what u are changing.) 1.65 Volt are normal for 2600+ Barton. My is running with 1.50 V!
__________________
AMD Athlon XP 2600+ (Barton) /1024 MB DDR Ram - 400 Mhz - used 333 Mhz (Twinmos) / MSI K7N2 Delta ILSR (Nforce 2 Ultra 400) / Asus 6800 LE @ 16 Pipes / 160 GB HDD (Samsung, 8 MB Cache) | 507 user of gamershell.com ! |
|
|
|
Linear Mode
Powered by vBulletin Copyright 2000 - 2008, Jelsoft Enterprises Ltd
Template-Modifikationen durch TMS
Template-Modifikationen durch TMS
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
